Dealing with a clogged drain can be a frustrating and inconvenient experience for any homeowner. It’s a common household issue that can disrupt your daily routine and even lead to more severe plumbing problems if left unaddressed. In this blog post, we’re providing you with the do it yourself steps on how to fix a clogged drain. With a few simple steps and some basic tools, you’ll have your drains flowing freely again in no time.
Step 1: Gather The Necessary Tools:
Before you begin tackling the clogged drain, it’s essential to have the right tools on hand. Here are a few items you’ll need:
a) Plunger: A plunger is a versatile tool that can help clear most minor clogs. Make sure to have a cup plunger for sinks and a flange plunger for toilets.
b) Drain snake: Also known as a plumber’s snake or auger, a drain snake can be used to reach deeper clogs that are not easily cleared with a plunger.
c) Baking soda and vinegar: This natural cleaning solution is excellent for breaking down organic matter and removing mild blockages.
d) Hot water: Boiling water can help dissolve grease and other substances causing the clog.
Step 2: Plunge Away!
Start by using a plunger to attempt to dislodge the clog. If it’s a sink, cover the overflow holes by the faucet with duct tape or a wet cloth to ensure proper suction. Position the plunger over the drain, ensuring it covers it completely. Apply downward pressure and then pull up, creating a suction effect. Repeat this motion several times, and the suction force should help loosen the clog. For toilets, plunge gently but firmly to avoid any splashing. Be patient and persistent with this method.
Step 3: Snake It Out
If plunging doesn’t get the job done, it’s time to bring out the drain snake. Insert the snake’s cable into the drain and turn the handle clockwise to extend it further. Keep pushing the snake until you encounter resistance, then rotate it back and forth to break up the clog. Once you feel the clog loosen, pull out the snake and dispose of any debris that may have come out. Run hot water down the drain to flush away any remaining residue.
Step 4: The power of baking ingredients:
Further prevention:
Prevention is always better than cure, and the same applies to clogged drains. Here are a few tips to keep your drains clear:
1. Install drain screens or stoppers to catch hair, food particles, and other debris.Avoid pouring grease, oil, or coffee grounds down the drain.
2. Regularly clean your drains with a mixture of baking soda and hot water to prevent build-up.
3. Be mindful of what goes down the toilet and avoid flushing items that aren’t meant to be flushed, such as wipes or sanitary products.
Dealing with a clogged drain doesn’t have to be a headache. With the right tools and a bit of drain knowledge, you can unclog most drains on your own. If these tricks don’t work, or if you’re uncomfortable performing the task yourself, contact us at JF Plumbing to come do the hard work for you!Our experienced team of professionals will have your drains unclogged and flowing freely in no time. If you are dealing with clogged drains, contact our team today.
CONTACT JF PLUMBING